Hardtop Convertible Linkage
This SolidWorks animation of the drive linkage for a hardtop convertible was prepared by Oscar Alonso from U.S. Patent No. 7014247 (Dilluvio) and previous references.
This SolidWorks animation of the drive linkage for a hardtop convertible was prepared by Oscar Alonso from U.S. Patent No. 7014247 (Dilluvio) and previous references.
This compact six-bar linkage is designed to lift and dump a trash can. Eddie Lee, Peter Lim, Khemara Tep and Kevin Hung worked on the design and construction of the prototype.
This is the SolidWorks animation:
This is a video of the operation of the prototype:
This six-bar linkage is designed to move a shelf from a position down and forward to a stowed position up and away.
This video shows our latest model for the six-bar linkage that deploys and stows a television monitor. This was designed and built by Eddie Lee, Peter Lim, Khemara Tep and Kevin Hung.
This is a SolidWorks animation of this six-bar linkage:
This is a video of the prototype:
The Formula SAE California collegiate race car engineering competition opened June 16, 2010 at the Auto Club Speedway in Fontana, CA. Student built racecars from all over the world can be seen in photos from this first day of the event. Here is a link to photos of the first day and a link to the 2010 event guide
Pictures from Day 2 can be found at the SAE SoCal facebook page.
PIctures from Day 3 are now available as the Facebook album.
The results are available at the link FSAE California results.
My link to a video of Theo Jansen’s walking machines seems unreliable, so it is best to go directly to the source: Theo Jansens Strandbeest site
You can access his videos on the page: film
For example, this video is available:
[vimeo]http://vimeo.com/952254?pg=embed&sec=952254[/vimeo]
Stock Drive Products has an array of downloadable catalogs with technical information for a range of mechanical components. See the link: Stock Drive Products Catalogs
The UCI Energy Invitational has competitors run on a course that combines highway, autocross and metered idle sections with only $1.00 of the energy of their choice. This year six entrants competed on May 23, 2010. Teams from UC Irvine, UC Davis and Cal Poly Pomona formed the collegiate class, and an inventor’s electric three-wheeler, a first generation Honda Insight and a Smarte Car formed the enthusiast class.
Mechanism Generator is a SolidWorks add-in that assists in generating solid models of four-bar and six-bar linkages. It designed to be used in coordination with our Mathematica design software, which is freely available.
Smitty constructed this prototype of our spherical deployable structure. It is an assembly of spherical rhombus linkages that expands to form a semi-circular structure.